When you are in search of top-quality Rivet Blind items that are listed with the NSN 5320008664671, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number CR7310-8-08, a Sps Technologies Inc item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5320-00-866-4671 item from Sps Technologies Inc was specifically produced under the CAGE Code 11815. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5320 Rivets. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-00-866-4671 Item PartTypeName: RIVET,BLIND | 5320 | 008664671 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| B100T8-8 | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 0.898 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZE | SHANK DIAMETER | 0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AAZF | SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| AAZG | HEAD MAJOR DIAMETER | 0.507 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.469 INCHES MINIMUM AND 0.532 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM BODY AND 40.0 ROCKWELL C MAXIMUM BODY |
| CQFM | HARDNESS RATING | 48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | MECHINACL LOCK STEEL AISI 660,S TEEL QQ-S-633 COMP C1144 |
| MATT | MATERIAL | STEEL COMP 4037 BODY OR STEEL COMP 4130 BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM OR QQ-W-405 FED SPEC SINGLE MATERIAL RESPONSE STEM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-W-405 FED SPEC 1ST MATERIAL RESPONSE BODY OR QQ-W-405 FED SPEC 2ND MATERIAL RESPONSE BODY OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE BODY |
| SFTT | SURFACE TREATMENT | CADMIUM STEM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1 OR 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| CQSX | SHEAR STRENGTH | 5900 SINGLE POUNDS PER SQUARE INCH |
| MATT | MATERIAL | STEEL COMP 1144 SLEEVE |
| MATT | MATERIAL | STEEL COMP 8740 STEM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| SFTT | SURFACE TREATMENT | CADMIUM BODY |
| SFTT | SURFACE TREATMENT | CADMIUM MECHANICAL LOCK |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL3 FED SPEC SINGLE TREATMENT RESPONSE MECHANICAL LOCK |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote