When you are in search of top-quality Gear Spur items that are listed with the NSN 3020007521006, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number TG200-2, a Spalla Inc item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 3020-00-752-1006 item from Spalla Inc was specifically produced under the CAGE Code 22852. Additionally, with the first digits of its NSN, this item also belongs to the FSC 3020 Gear Pulley Sprocket and Transmission Chain. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-752-1006 Item PartTypeName: GEAR,SPUR | 3020 | 007521006 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3020-00-752-1006 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ANTP | BORE STYLE | W/COUNTERBORE FIRST END |
| BDTX | SPLINE PITCH DIAMETER | 2.1428 INCHES NOMINAL BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 7.803 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 1.734 INCHES |
| AGJS | PITCH DIAMETER | 7.5000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 45 |
| CWNH | TOOTH FORM | STANDARD |
| CWRM | FACE NOMINAL WIDTH | 1.125 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.428 INCHES BOTH ENDS |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.250 INCHES FIRST END |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 2.625 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 3.750 INCHES FIRST END |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.384 INCHES FIRST END |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 3.122 INCHES FIRST END |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.218 INCHES FIRST END |
| MATT | MATERIAL | STEEL COMP 8620H OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB,ONE FLUSH HUB |
| AAQL | BODY STYLE | WEBBED,SOLID |
| ABSA | SPLINE QUANTITY | 15 BOTH ENDS |
| ANTP | BORE STYLE | INVOLUTE SPLINE SECOND END |
| CQFM | HARDNESS RATING | 59.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL |
| CWPP | PRESSURE ANGLE | 17.5000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.604 INCHES FIRST END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote