When you are in search of top-quality Motor Hydraulic items that are listed with the NSN 4320013073855, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number M4D-128-3N00-A102, a Parker Hannifin Corporation item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 4320-01-307-3855 item from Parker Hannifin Corporation was specifically produced under the CAGE Code 9F512. Additionally, with the first digits of its NSN, this item also belongs to the FSC 4320 Power And Hand Pumps. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!
| MRC | Criteria | Characteristic |
|---|---|---|
| ARQA | SHAFT PROTRUSION LENGTH | 1.690 INCHES NOMINAL |
| ASMM | CONNECTION QUANTITY | 2 AND 1 |
| ABUJ | THREAD SIZE | 0.250-16 |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AZFF | BOLT HOLE SPACING | 1.190 IN. BY 2.310 IN. |
| AJLF | HOUSING MATERIAL | STEEL |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGJS | PITCH DIAMETER | 1.137 INCHES MINIMUM AND 1.146 INCHES MAXIMUM |
| AAPL | TORQUE LOAD RATING | 3218.0 INCH-POUNDS |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | SAE-J518B |
| AZFG | MOUNTING BOLT HOLE SPACING | 4.508 IN. BY 4.508 IN. |
| ASAP | SPLINE PITCH | 12/24 |
| APJC | THREAD LOCATION | INTERNAL |
| AAUH | SPLINE MINOR DIAMETER | 1.0497 INCHES MINIMUM AND 1.0627 INCHES MAXIMUM |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| AAUJ | SPLINE MAJOR DIAMETER | 1.2243 INCHES MINIMUM AND 1.2293 INCHES MAXIMUM |
| AXFC | CONNECTION DESIGN | FLANGED AND THREADED |
| ABSA | SPLINE QUANTITY | 14 |
| AXFD | BOLT HOLE THREAD SIZE | 0.438-14 |
| AXFH | SPLINE LENGTH | 1.000 INCHES NOMINAL |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| ABTB | MOUNTING HOLE DIAMETER | 0.560 INCHES NOMINAL |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | 8.080 CUBIC INCHES |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 4000.0 |
| AWLS | CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
| AAXX | MOUNTING TYPE | PAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote