Request a Prompt Quote on Moog Inc Part Number HDC 11 F 6 B644 with the NSN 5990013489812

Part Number: HDC 11 F 6 B644

Alternate P/N: HDC11F6B644

Manufacturer: Moog Inc

NSN: 5990-01-348-9812

NIIN: 013489812

Item Name : Synchro Differential Transmitter

CAGE Code: 99932

FSC: 5990 Synchros and Resolvers

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

When you are in search of top-quality Synchro Differential Transmitter items that are listed with the NSN 5990013489812, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number HDC 11 F 6 B644, a Moog Inc item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5990-01-348-9812 item from Moog Inc was specifically produced under the CAGE Code 99932. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5990 Synchros and Resolvers. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!

NSN Information for Part Number HDC 11 F 6 B644 with NSN 5990-01-348-9812, 5990013489812

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-01-348-9812 Item PartTypeName: SYNCHRO,DIFFERENTIAL TRANSMITTER	5990	013489812	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
HDC-11-F-6/B644	5	9	5

Characteristics Data of NSN 5990-01-348-9812, 5990013489812

MRC	Criteria	Characteristic
AAVL	PILOT DIAMETER	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	0.9700 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.5620 INCHES NOMINAL SINGLE SHAFT
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	11.8 NOMINAL
AJSP	STATOR INPUT CURRENT RATING	0.054 AMPERES NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	61.00 NOMINAL
AJTA	ZRS RESISTANCE IN OHMS	59.00 NOMINAL
AJTS	ROTOR DC RESISTANCE IN OHMS	59.00 NOMINAL
AJTT	STATOR DC RESISTANCE IN OHMS	21.00 NOMINAL
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	16.0 CENTIMETER-GRAMS MAXIMUM
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	4.0 CENTIMETER-GRAMS MAXIMUM
AJWQ	PILOT LENGTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
AJXB	SHAFT MAXIMUM RUNOUT	0.0010 INCHES
CQRG	BODY MATERIAL	STEEL CORROSION RESISTING
CQTM	TERMINAL LOCATION	REAR
CQZS	SHAFT SLOT DEPTH	0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT
CRKL	PLUS J ZRS REACTANCE IN OHMS	21.00 NOMINAL
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CSJY	TRANSFORMATION RATIO	1.166 STATOR TO ROTOR NOMINAL
TTQY	TERMINAL TYPE AND QUANTITY	6 WIRE LEAD
AAVH	SHOULDER DIAMETER	0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
CRSY	ALIGNMENT HOLE DEPTH	0.0700 INCHES MAXIMUM
AAQL	BODY STYLE	STANDARD ROUND C
ABHP	OVERALL LENGTH	2.2020 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	1.0610 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM
ABPC	UNDERCUT WIDTH	0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM
AHCG	MAXIMUM TEMP RISE	125.0 DEG CELSIUS
AJSQ	STATOR INPUT ELECTRICAL POWER RATING	0.102 WATTS NOMINAL
AJWG	SHAFT MAXIMUM RADIAL PLAY	0.0005 INCHES
AJWH	SHAFT END PLAY	0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM
AJWR	SHOULDER LENGTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.6400 INCHES MAXIMUM
CQXQ	PLUS J ZRO REACTANCE IN OHMS	210.00 NOMINAL
CRHN	SHAFT SLOT WIDTH	0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT
CTCW	ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL