Request a Prompt Quote on Moog Inc Part Number CWH-10-AS-1 with the NSN 5990008195615

Part Number: CWH-10-AS-1

Alternate P/N: CWH10AS1

Manufacturer: Moog Inc

NSN: 5990-00-819-5615

NIIN: 008195615

Item Name : Resolver Electrical

CAGE Code: 99932

FSC: 5990 Synchros and Resolvers

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

When you are in search of top-quality Resolver Electrical items that are listed with the NSN 5990008195615, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number CWH-10-AS-1, a Moog Inc item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5990-00-819-5615 item from Moog Inc was specifically produced under the CAGE Code 99932. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5990 Synchros and Resolvers. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!

NSN Information for Part Number CWH-10-AS-1 with NSN 5990-00-819-5615, 5990008195615

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-819-5615 Item PartTypeName: RESOLVER,ELECTRICAL	5990	008195615	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
CWH-10-AS-1	6	2	5

Characteristics Data of NSN 5990-00-819-5615, 5990008195615

MRC	Criteria	Characteristic
AAQL	BODY STYLE	STANDARD ROUND C
AAVL	PILOT DIAMETER	0.5000 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0620 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	0.8400 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0620 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.0900 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.3370 INCHES NOMINAL SINGLE SHAFT
AEBZ	SCHEMATIC DIAGRAM DESIGNATOR	2 ROTOR,1 STATOR
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AGAV	END ITEM IDENTIFICATION	316-1
AHCG	MAXIMUM TEMP RISE	20.0 DEG CELSIUS
AJSL	BODY SIZE	10
AJSQ	STATOR INPUT ELECTRICAL POWER RATING	210.0 MILLIWATTS NOMINAL
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	26.0 NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJST	ROTOR INPUT CURRENT RATING	38.0 MILLIAMPERES NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	155.00 NOMINAL
AJTA	ZRS RESISTANCE IN OHMS	215.00 NOMINAL
AJTS	ROTOR DC RESISTANCE IN OHMS	110.00 NOMINAL
AJTT	STATOR DC RESISTANCE IN OHMS	28.00 NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	10.000 INPUT TO OUTPUT NOMINAL
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	1.00
AJVJ	INTERAXIS ERROR ANGULAR RANGE IN MINUTES	-1.0/1.0
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-15.0/15.0
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	4.0 CENTIMETER-GRAMS MAXIMUM
AJVW	ALIGNMENT HOLE QUANTITY	3
AJWE	SHAFT RADIAL PLAY TEST POINT	0.125 INCHES MAXIMUM
AJWG	SHAFT MAXIMUM RADIAL PLAY	0.0005 INCHES
AJWH	SHAFT END PLAY	0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM
AJXB	SHAFT MAXIMUM RUNOUT	0.0010 INCHES
CQXQ	PLUS J ZRO REACTANCE IN OHMS	665.00 NOMINAL
CRKL	PLUS J ZRS REACTANCE IN OHMS	70.00 NOMINAL
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CWXK	SHAFT RADIAL PLAY DETERMINING WEIGHT	4.0 OUNCES
CWYF	SHAFT END PLAY DETERMINING WEIGHT	8.0 OUNCES
TTQY	TERMINAL TYPE AND QUANTITY	6 WIRE LEAD
AAFZ	BODY MATERIAL	ALUMINUM
AAVH	SHOULDER DIAMETER	0.8123 INCHES MAXIMUM
ABHP	OVERALL LENGTH	1.6310 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	0.9370 INCHES MAXIMUM
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	11.8 NOMINAL
AJSP	STATOR INPUT CURRENT RATING	72.0 MILLIAMPERES NOMINAL
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	224.0 ALLQJAA3.500 FINISHED-CHAMFERED
AJSY	ZSO RESISTANCE IN OHMS	41.00 NOMINAL
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	16.0 CENTIMETER-GRAMS MAXIMUM
AJWQ	PILOT LENGTH	0.0380 NOMINAL INCHES
AJWR	SHOULDER LENGTH	0.0620 NOMINAL INCHES
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.2410 INCHES MAXIMUM
CQTM	TERMINAL LOCATION	REAR
CQZS	SHAFT SLOT DEPTH	0.0310 INCHES MAXIMUM SINGLE SHAFT
CRGZ	PLUS J ZSO REACTANCE IN OHMS	159.00 NOMINAL
CRHN	SHAFT SLOT WIDTH	0.0310 INCHES MAXIMUM SINGLE SHAFT
CRSY	ALIGNMENT HOLE DEPTH	0.0500 INCHES MAXIMUM
CTCW	ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.6780 INCHES NOMINAL