Request a Prompt Quote on Lockheed Martin Corporation Part Number 552-00S20K with the NSN 5905010195055

Part Number: 552-00S20K

Alternate P/N: 55200S20K

Manufacturer: Lockheed Martin Corporation

NSN: 5905-01-019-5055

NIIN: 010195055

Item Name : Resistor Variable Wire Wound Non

CAGE Code: 94271

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

When you are in search of top-quality Resistor Variable Wire Wound Non items that are listed with the NSN 5905010195055, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number 552-00S20K, a Lockheed Martin Corporation item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5905-01-019-5055 item from Lockheed Martin Corporation was specifically produced under the CAGE Code 94271. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5905 Resistors. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!

NSN Information for Part Number 552-00S20K with NSN 5905-01-019-5055, 5905010195055

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-019-5055 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON	5905	010195055	0	N	B
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		B	G	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
M39015/02-008W	B	1	C			A

Characteristics Data of NSN 5905-01-019-5055, 5905010195055

MRC	Criteria	Characteristic
CBME	CUBIC MEASURE	0.052 CUBIC INCHES
CQCC	ELECTRICAL RESISTANCE PER SECTION	20.0 KILOHMS SINGLE SECTION
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	8280.0 MINIMUM AND 13680.0 MAXIMUM
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	175.0 SINGLE SECTION
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
PMLC	PRECIOUS MATERIAL AND LOCATION	TERMINAL SURFACE GOLD
PRMT	PRECIOUS MATERIAL	GOLD
TEST	TEST DATA DOCUMENT	81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-R-39015/2 GOVERNMENT SPECIFICATION
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES
AARG	RELIABILITY INDICATOR	ESTABLISHED
AARH	RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.100
ABJT	TERMINAL LENGTH	0.187 INCHES MINIMUM
ABTB	MOUNTING HOLE DIAMETER	0.073 INCHES MINIMUM AND 0.083 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.045 INCHES MAXIMUM
ADAQ	BODY LENGTH	0.540 INCHES MAXIMUM
ADAT	BODY WIDTH	0.230 INCHES MAXIMUM
ADAU	BODY HEIGHT	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AEDX	SHAFT STYLE	ROUND,SLOTTED
AEDZ	SHAFT BEARING TYPE	BEARING
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	8280.0 MINIMUM AND 13680.0 MAXIMUM
AEFK	MAXIMUM STARTING TORQUE	10.00 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	10.00 INCH-OUNCES
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.190 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.513 INCHES MINIMUM AND 0.526 INCHES MAXIMUM
AKPV	MOUNTING FACILITY QUANTITY	2
APXH	TERMINAL LOCATION	REAR END
AXGY	MOUNTING METHOD	UNTHREADED HOLE
CBBL	FEATURES PROVIDED	HUMIDITY PROOF