Request a Prompt Quote on General Dynamics Global Imaging Part Number VRP11-4D9-50 with the NSN 5990009673793

Part Number: VRP11-4D9-50

Alternate P/N: VRP114D950

Manufacturer: General Dynamics Global Imaging

NSN: 5990-00-967-3793

NIIN: 009673793

Item Name : Resolver Electrical

CAGE Code: 10112

FSC: 5990 Synchros and Resolvers

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

When you are in search of top-quality Resolver Electrical items that are listed with the NSN 5990009673793, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number VRP11-4D9-50, a General Dynamics Global Imaging item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5990-00-967-3793 item from General Dynamics Global Imaging was specifically produced under the CAGE Code 10112. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5990 Synchros and Resolvers. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!

NSN Information for Part Number VRP11-4D9-50 with NSN 5990-00-967-3793, 5990009673793

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-967-3793 Item PartTypeName: RESOLVER,ELECTRICAL	5990	009673793		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
512-104-903-4	6	2	3

Characteristics Data of NSN 5990-00-967-3793, 5990009673793

MRC	Criteria	Characteristic
AAFZ	BODY MATERIAL	STEEL,STAINLESS
AAQL	BODY STYLE	STANDARD ROUND C
AAVH	SHOULDER DIAMETER	0.9700 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.6250 INCHES NOMINAL
ABHP	OVERALL LENGTH	2.4200 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	1.0610 INCHES MINIMUM
ABKU	FLANGE THICKNESS	0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	0.9995 INCHES MINIMUM
ABPC	UNDERCUT WIDTH	0.0470 INCHES MINIMUM AND 0.0530 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.1873 INCHES NOMINAL SINGLE SHAFT
ABXF	SHAFT LENGTH	0.3900 INCHES MINIMUM SINGLE SHAFT AND 0.4200 INCHES MAXIMUM SINGLE SHAFT
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AJSL	BODY SIZE	11
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	26.0 MAXIMUM
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	605.00 NOMINAL
AJSY	ZSO RESISTANCE IN OHMS	400.00 NOMINAL
AJTS	ROTOR DC RESISTANCE IN OHMS	300.00 NOMINAL
AJTT	STATOR DC RESISTANCE IN OHMS	250.00 NOMINAL
AJTX	COMPENSATION METHOD	WINDING COMPENSATED
AJVC	COMPENSATOR DC RESISTANCE IN OHMS	440.00 NOMINAL
AJVD	COMPENSATOR TRANSFORMATION RATIO IN PERCENT	1.000 ROTOR TO COMPENSATOR NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	7.000 INPUT TO OUTPUT NOMINAL
AJVJ	INTERAXIS ERROR ANGULAR RANGE IN MINUTES	-5.0/5.0
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	0.33 INCH-OUNCES MAXIMUM
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	0.11 INCH-OUNCES MAXIMUM
AJVW	ALIGNMENT HOLE QUANTITY	4
AJWQ	PILOT LENGTH	0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS
AJWR	SHOULDER LENGTH	0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	2.0000 INCHES MAXIMUM
CQTM	TERMINAL LOCATION	REAR
CQXQ	PLUS J ZRO REACTANCE IN OHMS	220.00 NOMINAL
CQZS	SHAFT SLOT DEPTH	0.0300 INCHES NOMINAL SINGLE SHAFT
CRGZ	PLUS J ZSO REACTANCE IN OHMS	2000.00 NOMINAL
CRHN	SHAFT SLOT WIDTH	0.0300 INCHES NOMINAL SINGLE SHAFT
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CRSY	ALIGNMENT HOLE DEPTH	0.4045 INCHES MINIMUM AND 0.4075 INCHES MAXIMUM
CSJY	TRANSFORMATION RATIO	0.980 ROTOR TO STATOR NOMINAL
CTCW	ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM
TTQY	TERMINAL TYPE AND QUANTITY	8 SCREW