Request a Prompt Quote on General Dynamics Global Imaging Part Number VCT11-4C5 with the NSN 5990007865410

Part Number: VCT11-4C5

Alternate P/N: VCT114C5

Manufacturer: General Dynamics Global Imaging

NSN: 5990-00-786-5410

NIIN: 007865410

Item Name : Synchro Control Transformer

CAGE Code: 10112

FSC: 5990 Synchros and Resolvers

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

When you are in search of top-quality Synchro Control Transformer items that are listed with the NSN 5990007865410, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number VCT11-4C5, a General Dynamics Global Imaging item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5990-00-786-5410 item from General Dynamics Global Imaging was specifically produced under the CAGE Code 10112. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5990 Synchros and Resolvers. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!

NSN Information for Part Number VCT11-4C5 with NSN 5990-00-786-5410, 5990007865410

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-786-5410 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER	5990	007865410	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
RS900-3A	C	2	3

Characteristics Data of NSN 5990-00-786-5410, 5990007865410

MRC	Criteria	Characteristic
AAFZ	BODY MATERIAL	STEEL,CORROSION RESISTING
AAVH	SHOULDER DIAMETER	1.0000 INCHES NOMINAL
AAVL	PILOT DIAMETER	0.6250 INCHES NOMINAL
ABHP	OVERALL LENGTH	2.3710 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0930 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	0.9750 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.1200 INCHES NOMINAL SINGLE SHAFT
ABXF	SHAFT LENGTH	0.3130 INCHES NOMINAL SINGLE SHAFT
AJSL	BODY SIZE	11
AJSP	STATOR INPUT CURRENT RATING	21.0 MILLIAMPERES NOMINAL
AJSQ	STATOR INPUT ELECTRICAL POWER RATING	35.0 MILLIWATTS NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJTH	ZRO IMPEDANCE ANGLE IN DEG	79.20 NOMINAL
AJTS	ROTOR DC RESISTANCE IN OHMS	385.00 NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	4.200 INPUT TO OUTPUT NOMINAL
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	16.0 CENTIMETER-GRAMS MAXIMUM
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.7990 INCHES MAXIMUM
CSJY	TRANSFORMATION RATIO	2.203 ROTOR TO STATOR NOMINAL
CWYF	SHAFT END PLAY DETERMINING WEIGHT	16.0 OUNCES
TTQY	TERMINAL TYPE AND QUANTITY	5 SCREW
AAQL	BODY STYLE	STANDARD ROUND C
ABKK	FLANGE DIAMETER	1.0620 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0500 INCHES NOMINAL
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	11.8 NOMINAL
AJTG	ZRO IMPEDANCE MAGNITUDE IN OHMS	3340.00 NOMINAL
AJTJ	ZSO IMPEDANCE MAGNITUDE IN OHMS	577.00 NOMINAL
AJTK	ZSO IMPEDANCE ANGLE IN DEG	80.70 NOMINAL
AJTL	ZRS IMPEDANCE MAGNITUDE IN OHMS	659.00 NOMINAL
AJTM	ZRS IMPEDANCE ANGLE IN DEG	30.10 NOMINAL
AJTT	STATOR DC RESISTANCE IN OHMS	60.00 NOMINAL
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	34.00 OUTPUT
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	53.00
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-10.0 TO 10.0
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	4.0 CENTIMETER-GRAMS MAXIMUM
AJWG	SHAFT MAXIMUM RADIAL PLAY	0.0005 INCHES
AJWH	SHAFT END PLAY	0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM
AJWQ	PILOT LENGTH	0.0620 INCHES NOMINAL
AJWR	SHOULDER LENGTH	0.0620 INCHES NOMINAL
AJXB	SHAFT MAXIMUM RUNOUT	0.0008 INCHES
CQTM	TERMINAL LOCATION	REAR
CQZS	SHAFT SLOT DEPTH	0.0260 INCHES NOMINAL SINGLE SHAFT
CRHN	SHAFT SLOT WIDTH	0.0290 INCHES NOMINAL SINGLE SHAFT
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CWXK	SHAFT RADIAL PLAY DETERMINING WEIGHT	4.0 OUNCES