Request a Prompt Quote on General Dynamics Global Imaging Part Number VCX11-4A1-10 with the NSN 5990006525449

Part Number: VCX11-4A1-10

Alternate P/N: VCX114A110

Manufacturer: General Dynamics Global Imaging

NSN: 5990-00-652-5449

NIIN: 006525449

Item Name : Synchro Transmitter

CAGE Code: 10112

FSC: 5990 Synchros and Resolvers

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

When you are in search of top-quality Synchro Transmitter items that are listed with the NSN 5990006525449, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number VCX11-4A1-10, a General Dynamics Global Imaging item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5990-00-652-5449 item from General Dynamics Global Imaging was specifically produced under the CAGE Code 10112. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5990 Synchros and Resolvers. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!

NSN Information for Part Number VCX11-4A1-10 with NSN 5990-00-652-5449, 5990006525449

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-652-5449 Item PartTypeName: SYNCHRO,TRANSMITTER	5990	006525449	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
KGH11ERS40	2	2	5

Characteristics Data of NSN 5990-00-652-5449, 5990006525449

MRC	Criteria	Characteristic
AAQL	BODY STYLE	STANDARD ROUND C
AAVH	SHOULDER DIAMETER	0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
ABHP	OVERALL LENGTH	2.3510 INCHES NOMINAL
ABKK	FLANGE DIAMETER	1.0590 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0930 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	0.9750 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0620 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.1867 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.6170 INCHES NOMINAL SINGLE SHAFT
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AJSL	BODY SIZE	11
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	26.0 NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJST	ROTOR INPUT CURRENT RATING	280.0 MILLIAMPERES MAXIMUM
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	950.0 MILLIWATTS NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	15.50 NOMINAL
AJSY	ZSO RESISTANCE IN OHMS	3.30 NOMINAL
AJTA	ZRS RESISTANCE IN OHMS	21.00 NOMINAL
AJTS	ROTOR DC RESISTANCE IN OHMS	9.00 NOMINAL
AJTT	STATOR DC RESISTANCE IN OHMS	3.00 NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	5.000 INPUT TO OUTPUT NOMINAL
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	17.00 OUTPUT
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	26.00
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-10.0 TO 10.0
AJVM	SPLINE TOOTH QUANTITY	21 SINGLE SHAFT
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	16.0 CENTIMETER-GRAMS MAXIMUM
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	4.0 CENTIMETER-GRAMS MAXIMUM
AJVW	ALIGNMENT HOLE QUANTITY	4
AJWQ	PILOT LENGTH	0.0620 INCHES NOMINAL
AJWR	SHOULDER LENGTH	0.0620 INCHES NOMINAL
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.7960 INCHES NOMINAL
AJXA	SPLINE TOOTH DIAMETRAL PITCH	120 SINGLE SHAFT
AJYY	SHAFT THREAD SERIES DESIGNATOR	UNF SINGLE SHAFT
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND SINGLE SHAFT
AKAN	SHAFT THREAD CLASS	2A SINGLE SHAFT
CQRG	BODY MATERIAL	STEEL CORROSION RESISTING
CQTM	TERMINAL LOCATION	REAR
CQWQ	SHAFT THREAD LENGTH	0.2460 INCHES MAXIMUM SINGLE SHAFT
CQXQ	PLUS J ZRO REACTANCE IN OHMS	106.00 NOMINAL
CRGZ	PLUS J ZSO REACTANCE IN OHMS	17.80 NOMINAL
CRKL	PLUS J ZRS REACTANCE IN OHMS	9.30 NOMINAL
CRSJ	SHAFT TYPE	SPLINE W/THREADS SINGLE SHAFT
CRSY	ALIGNMENT HOLE DEPTH	0.0620 INCHES NOMINAL
CSJY	TRANSFORMATION RATIO	0.454 ROTOR TO STATOR NOMINAL
CTCW	ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.8120 INCHES NOMINAL
CWBH	SHAFT NOMINAL THREAD SIZE	0.190 INCHES SINGLE SHAFT
TTQY	TERMINAL TYPE AND QUANTITY	5 SCREW