Request a Prompt Quote on General Dynamics Global Imaging Part Number VCX11-4G1 with the NSN 5990002063753

Part Number: VCX11-4G1

Alternate P/N: VCX114G1

Manufacturer: General Dynamics Global Imaging

NSN: 5990-00-206-3753

NIIN: 002063753

Item Name : Synchro Transmitter

CAGE Code: 10112

FSC: 5990 Synchros and Resolvers

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

When you are in search of top-quality Synchro Transmitter items that are listed with the NSN 5990002063753, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number VCX11-4G1, a General Dynamics Global Imaging item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5990-00-206-3753 item from General Dynamics Global Imaging was specifically produced under the CAGE Code 10112. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5990 Synchros and Resolvers. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!

NSN Information for Part Number VCX11-4G1 with NSN 5990-00-206-3753, 5990002063753

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-206-3753 Item PartTypeName: SYNCHRO,TRANSMITTER	5990	002063753	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1.791521	2	2	5

Characteristics Data of NSN 5990-00-206-3753, 5990002063753

MRC	Criteria	Characteristic
AAQL	BODY STYLE	STANDARD ROUND C
AAVH	SHOULDER DIAMETER	0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
ABHP	OVERALL LENGTH	2.3360 INCHES MINIMUM AND 2.3760 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	1.0570 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0930 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	0.9750 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0620 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.1198 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.5460 INCHES MINIMUM AND 0.5650 INCHES MAXIMUM SINGLE SHAFT
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AHCG	MAXIMUM TEMP RISE	20.0 DEG CELSIUS
AHYF	SECURING HOLE QUANTITY	4
AJSL	BODY SIZE	11
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	115.0 NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJST	ROTOR INPUT CURRENT RATING	31.0 MILLIAMPERES MAXIMUM
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	490.0 MILLIWATTS NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	3720.00 MINIMUM AND 4700.00 MAXIMUM
AJTC	ZSS RESISTANCE IN OHMS	410.00 MINIMUM AND 500.00 MAXIMUM
AJTG	ZRO IMPEDANCE MAGNITUDE IN OHMS	80.00 MINIMUM AND 84.00 MAXIMUM
AJTN	ZSS IMPEDANCE MAGNITUDE IN OHMS	17.00 MINIMUM AND 26.00 MAXIMUM
AJVF	PHASE SHIFT ANGLE IN DEG	4.500 INPUT TO OUTPUT NOMINAL
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	45.00 OUTPUT
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	75.00
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-7.0 TO 7.0
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	0.07 INCH-OUNCES MAXIMUM
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	0.07 INCH-OUNCES MAXIMUM
AJWQ	PILOT LENGTH	0.0450 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM
AJWR	SHOULDER LENGTH	0.0590 INCHES MINIMUM AND 0.0790 INCHES MAXIMUM
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.7910 INCHES MINIMUM AND 1.8110 INCHES MAXIMUM
AKEJ	MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR	UNC
CQRG	BODY MATERIAL	STEEL CORROSION RESISTING
CQTM	TERMINAL LOCATION	REAR
CQZS	SHAFT SLOT DEPTH	0.0250 INCHES NOMINAL SINGLE SHAFT
CRHN	SHAFT SLOT WIDTH	0.0200 INCHES NOMINAL SINGLE SHAFT
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CRSY	ALIGNMENT HOLE DEPTH	0.1250 INCHES NOMINAL
CRYY	MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER	0.112 INCHES
CSJY	TRANSFORMATION RATIO	0.783 ROTOR TO STATOR NOMINAL
CTCW	ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.6250 INCHES NOMINAL
TEST	TEST DATA DOCUMENT	81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
TTQY	TERMINAL TYPE AND QUANTITY	5 SCREW