Request a Prompt Quote on General Dynamics Global Imaging Part Number BTM18-L with the NSN 5977015952227

Part Number: BTM18-L

Alternate P/N: BTM18L

Manufacturer: General Dynamics Global Imaging

NSN: 5977-01-595-2227

NIIN: 015952227

Item Name : Brush Electrical Contact

CAGE Code: 1HT10

FSC: 5977 Electrical Contact Brushes and Electrodes

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

When you are in search of top-quality Brush Electrical Contact items that are listed with the NSN 5977015952227, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number BTM18-L, a General Dynamics Global Imaging item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5977-01-595-2227 item from General Dynamics Global Imaging was specifically produced under the CAGE Code 1HT10. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5977 Electrical Contact Brushes and Electrodes. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!

NSN Information for Part Number BTM18-L with NSN 5977-01-595-2227, 5977015952227

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5977-01-595-2227 Item PartTypeName: BRUSH,ELECTRICAL CONTACT	5977	015952227		N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
			A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
BTM18-L	5	2	3

Characteristics Data of NSN 5977-01-595-2227, 5977015952227

MRC	Criteria	Characteristic
CXCY	Part Name Assigned By Controlling Agency	BTM18-L BRUSHLESS DC MOTORS
AAUB	Hole Diameter	0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
ADGZ	Distance From Center Of Hole To Outside Edge	0.8593 INCHES MINIMUM AND 0.8595 INCHES MAXIMUM
AGWM	Largest Outside Diameter	0.942 INCHES NOMINAL
MRC	Decoded Requirement	Clear Text Reply
STYL	Style Designator	ONE PIECE
AAQL	Body Style	CYLINDRICAL
CRPH	Outer Edge To Slot Edge Distance	0.041 INCHES NOMINAL
FEAT	Special Features	PEAK TORQUE:20 OZ/IN;POWER AT TP:60WATTS;MOTOR CONSTANT:2.59 OZ/IN;CONSTINUOUS TORQUE:6.0 OZ/IN;POWER AT CONSTINUOUS TORQUE:8.5 WATTS;INPUT VOLTS AT CONSTINUOUS TORQUE:8.5 VOLTS;ELECTRICAL TIME CONSTANT:0.77 MILLI-SECOND;MECHANICAL TIME CONSTANT:25 MILLI-SEC;DAMPING FACTOR:0.048 OZ/IN/RAD/SEC;ROTOR INERTIA:0.0012 OZ/IN/SEC;ANGULAR EXCURSION:+,- 50 DEGREES;TOTAL BREAKAWAY TORQUE:0.60 OZ/IN;MAX ALLOWABLE WDG TEMP:155.0C;NUMBER POLES:2;WEIGHT:5.6 OZ;WINDING CONSTANTS:RESISTANCE:6.5 +,-12.5 PERCENT OHMS;VOLTAGE AT TP:19.7 VOLTS NOMINAL;CURRENT AT TP:3.03 AMPS NOMINAL;TORQUE SENSITIVITY:6.60 OZ/IN/AMP,+,-10 PERCENT;BACK E.M.F. 0.047 VOLTS/RAD/SEC,+,-10 PERCENT;INDUCTANCE:5.0 MILLIHENRIES,+,- 30 PERCENT.
AGEK	Spring Free Length	1.717 INCHES MINIMUM AND 1.719 INCHES MAXIMUM