When you are in search of top-quality Gearcase Motor items that are listed with the NSN 3010006799396, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number 2602, a Ducommun Labarge Technologies Inc item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 3010-00-679-9396 item from Ducommun Labarge Technologies Inc was specifically produced under the CAGE Code 08719. Additionally, with the first digits of its NSN, this item also belongs to the FSC 3010 Torque Converters and Speed Changers. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-00-679-9396 Item PartTypeName: GEARCASE-MOTOR | 3010 | 006799396 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2602 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 1.375 INCHES |
| AAJU | OVERALL LENGTH | 3.385 INCHES |
| AAJV | OVERALL WIDTH | 1.124 INCHES |
| AAUB | HOLE DIAMETER | 0.0620 INCHES NOMINAL SINGLE END |
| AAZQ | HOLE DEPTH | 0.1870 INCHES NOMINAL SINGLE END |
| ABWV | SHAFT DIAMETER | 0.1874 INCHES NOMINAL SINGLE END |
| ACDC | CURRENT TYPE | DC INPUT |
| AJWZ | HOLE CENTER TO SHAFT END DISTANCE | 0.0940 INCHES NOMINAL SINGLE END |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | 75000.0 FEET |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | INTERMITTENT |
| AXCP | WINDING TYPE | SERIES WOUND |
| AXGY | MOUNTING METHOD | PAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| BFLT | TIME INTERVAL | 2.0 SECONDS MAXIMUM ON AND 3.0 SECONDS MINIMUM OFF |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS SINGLE END |
| BFMF | COOLING METHOD | AIR TO AIR COOLED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | 2.0 INCH-POUNDS RUNNING AND 2.5 INCH-POUNDS STALLED AND 2.5 INCH-POUNDS STARTING |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC REMOTE |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.550 INCHES SINGLE END |
| CWDY | TEMP RATING | -55.0 OPERATING DEG CELSIUS AND 85.0 OPERATING DEG CELSIUS |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.812 INCHES |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.812 INCHES |
| CWGL | CURRENT RATING IN AMPS | 0.250 SINGLE OUTPUT |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 27.5 LINE TO NEUTRAL SINGLE INPUT |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | 33.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CWHZ | SHAFT END CHARACTERISTIC | A13 SINGLE STYLE SINGLE END |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote