When you are in search of top-quality Saw Band Metal Cutting items that are listed with the NSN 3405004090063, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number 28-390, a Delta Intl Machinery Corp item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 3405-00-409-0063 item from Delta Intl Machinery Corp was specifically produced under the CAGE Code 83738. Additionally, with the first digits of its NSN, this item also belongs to the FSC 3405 Saws and Filing Machines. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!
| MRC | Criteria | Characteristic |
|---|---|---|
| AMSE | Voltage Rating | 115.0 VOLTS NOMINAL |
| FAAZ | Phase | SINGLE |
| AMZE | Rotational Speed Rating In Rpm | 1725 |
| ACDC | Current Type | AC |
| ANCY | Horsepower Rating | 0.75 |
| AWLX | Electric Motor Quantity | 1 |
| ACZB | Frequency Rating | 60.0 HERTZ NOMINAL |
| BWMG | Blade Maximum Length Accommodated | 94.000 INCHES |
| BWNB | Cutting Speed Quantity | 8 |
| BNBB | Table Type | TILTING |
| AAXX | Mounting Type | FLOOR |
| AKYD | Accessory Components And Quantity | FENCE,RIP,18 IN.,1;BELT ATTACHMENT,SANDING ABRASIVE,1;WELDER AND GRINDER,BUTT,1;LAMP ATTACHMENT,1;SLIDING,STRAIGHT AND ANGLE CUT-OFF,1;LAMP ATTACHMENT,SLIDING JIG,1;SPARE DRIVE BELT SET,1;BLADE,SKIP TOOTH,100 FT.COIL,ALUMINUM AND PLASTIC CUTTING,1;RAKER SET,FLEXIBLE BACK,CONVENTIONAL TOOTH,1/2 IN.WIDE,14 TOOTH,100 FT.COIL,1;BLADE,1/2 IN.WIDE,24 TOOTH,PIPE AND CHANNEL CUTTING,100 FT.COIL,1;BELT,SANDING,COARSE GRIT,3;BELT,SANDING,MEDIUM GRIT,3 |
| AQLX | Braking Facility | NOT INCLUDED |
| ALDF | Frame Type | RIGID |
| ARCM | Drive Method | ELECTRIC MOTOR |
| ARDQ | Table Length | 14.000 INCHES NOMINAL |
| ARDR | Table Width | 14.000 INCHES NOMINAL |
| BWMC | Band Type For Which Designed | SAW BLADE |
| BWMH | Blade Maximum Width Accommodated | 0.750 INCHES |
| BWMZ | Cutting Speed Range | +40.0/+3000.0 FEET PER MINUTE |
| BWND | Power Feed Feature | NOT PROVIDED |
| BWNJ | Integral Grinder | NOT INCLUDED |
| BWLY | Table Right Tilt Angle In Deg | 45 |
| BWLZ | Table Left Tilt Angle In Deg | 10 |
| BWML | Vise | NOT PROVIDED |
| BWMN | Distance Between Guide And Table | 6.250 INCHES NOMINAL |
| BWNG | Built-In Coolant System | NOT INCLUDED |
| BWNH | Integral Butt Welder | NOT INCLUDED |
| ZZZY | Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY THE DRIVE METHOD,ELECTRIC MOTOR REQUIREMENTS AND ACCESSORY COMPONENTS REQUIREMENT |
| MRC | Decoded Requirement | Clear Text Reply |
| AQCL | Throat Depth | 13.750 INCHES NOMINAL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote