When you are in search of top-quality Shaft Assembly Flex items that are listed with the NSN 6680007527479, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number 1268972, a Daimler Chrysler item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 6680-00-752-7479 item from Daimler Chrysler was specifically produced under the CAGE Code 12204. Additionally, with the first digits of its NSN, this item also belongs to the FSC 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 101.313 INCHES NOMINAL |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| AJXJ | CORE MATERIAL | STEEL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END UNF SECOND END |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| BJPS | CASING MATERIAL | RUBBER AND STEEL |
| SR-1 | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M10215-1F113 |
| AKMF | CORE SURFACE TREATMENT | CADMIUM PLATED |
| CGDN | MINIMUM OPERATING RADIUS | 5.000 INCHES |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| AECT | THREAD DEPTH | 0.327 INCHES NOMINAL FIRST END 0.375 INCHES NOMINAL SECOND END |
| ZZZV | III FSC APPLICATION DATA | TACHOMETER AND SPEEDOMETER DRIVE |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| ASDB | WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL FIRST END 0.750 INCHES NOMINAL SECOND END |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-10215K |
| APTD | END TYPE | ROUND KEYED FIRST END SQUARE MALE SECOND END |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR RUBBER COVER |
| ABUJ | (NON-CORE DATA) THREAD SIZE | 7/8-18 5/8-18 |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION |
| AEDN | TIP LENGTH | 1.018 INCHES MINIMUM AND 1.022 INCHES MAXIMUM FIRST END 0.950 INCHES MINIMUM AND 1.010 INCHES MAXIMUM SECOND END |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| CFRP | CASING LENGTH BETWEEN FERRULES | 100.000 INCHES NOMINAL |
| SR-1 | MANUFACTURERS CODE | 81349 |
| CFSM | (NON-CORE DATA) STRENGTH RATING CHARACTERISTICS | 15.0 POUNDS TORSION STRENGTH WINDING DIRECTION |
| CFRN | CASING SURFACE TREATMENT | ANY ACCEPTABLE |
| CFRQ | CASING OUTSIDE DIAMETER | 0.300 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| CFRX | OVERALL END SIZE | 1.188 IN. W 0.875 IN. W |
| CFRZ | CORE OVERALL LENGTH | 101.313 INCHES NOMINAL |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.150 INCHES MINIMUM DIAMETER AND 0.153 INCHES MAXIMUM DIAMETER FIRST END 0.101 INCHES MINIMUM ACROSS FLATS AND 0.104 INCHES MAXIMUM ACROSS FLATS SECOND END |
| AKMH | CORE DIAMETER | 0.150 INCHES NOMINAL |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| AAJD | THREAD CLASS | 2B FIRST END 2B SECOND END |
| SR-1 | SPEC/STD CONTROLLING DATA |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote