Request a Prompt Quote on Clarostat Sensors And Controls Part Number D408-N-PPS-2-5K with the NSN 5905015263114

Part Number: D408-N-PPS-2-5K

Alternate P/N: D408NPPS25K

Manufacturer: Clarostat Sensors And Controls

NSN: 5905-01-526-3114

NIIN: 015263114

Item Name : Resistor Variable Nonwire Wound

CAGE Code: 12697

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

When you are in search of top-quality Resistor Variable Nonwire Wound items that are listed with the NSN 5905015263114, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number D408-N-PPS-2-5K, a Clarostat Sensors And Controls item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5905-01-526-3114 item from Clarostat Sensors And Controls was specifically produced under the CAGE Code 12697. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5905 Resistors. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!

NSN Information for Part Number D408-N-PPS-2-5K with NSN 5905-01-526-3114, 5905015263114

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-526-3114 Item Description: RESISTOR,VARIABLE,NONWIRE WOUND,	5905	015263114		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC

Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
D408-N-PPS-2.5K	5	9	3

Characteristics Data of NSN 5905-01-526-3114, 5905015263114

MRC	Criteria	Characteristic
AEDX	SHAFT STYLE	ROUND, SLOTTED
AEEA	SWITCH TYPE	PUSH-PULL
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEGJ	SWITCH CONTACT ARRANGEMENT	SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.100 INCHES NOMINAL
AKPV	MOUNTING FACILITY QUANTITY	1
APXH	TERMINAL LOCATION	LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE
AXGY	MOUNTING METHOD	SLOT
CBBL	FEATURES PROVIDED	SWITCH
CQCC	ELECTRICAL RESISTANCE PER SECTION	2500.0 OHMS ALL SECTIONS
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.100 INCHES NOMINAL
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 HEAT SINK ALL SECTIONS
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0/+10.0 ALL SECTIONS
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN
AAPN	SECTION QUANTITY	2
AAQL	BODY STYLE	RECTANGULAR BUSHING MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABJT	TERMINAL LENGTH	0.875 INCHES NOMINAL
ABTD	MOUNTING SLOT WIDTH	0.031 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.125 INCHES NOMINAL
ABXF	SHAFT LENGTH	0.750 INCHES NOMINAL
ADAP	MOUNTING BUSHING LENGTH	0.250 INCHES NOMINAL
ADAQ	BODY LENGTH	1.062 INCHES NOMINAL
ADAT	BODY WIDTH	0.500 INCHES NOMINAL
ADAU	BODY HEIGHT	0.500 INCHES NOMINAL
AAPN	SECTION QUANTITY	2
AAQL	BODY STYLE	RECTANGULAR BUSHING MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABJT	TERMINAL LENGTH	0.875 INCHES NOMINAL
ABTD	MOUNTING SLOT WIDTH	0.031 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.125 INCHES NOMINAL
ABXF	SHAFT LENGTH	0.750 INCHES NOMINAL
ADAP	MOUNTING BUSHING LENGTH	0.250 INCHES NOMINAL
ADAQ	BODY LENGTH	1.062 INCHES NOMINAL
ADAT	BODY WIDTH	0.500 INCHES NOMINAL
ADAU	BODY HEIGHT	0.500 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND, SLOTTED
AEEA	SWITCH TYPE	PUSH-PULL
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEGJ	SWITCH CONTACT ARRANGEMENT	SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.100 INCHES NOMINAL
AKPV	MOUNTING FACILITY QUANTITY	1
APXH	TERMINAL LOCATION	LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE
AXGY	MOUNTING METHOD	SLOT
CBBL	FEATURES PROVIDED	SWITCH
CQCC	ELECTRICAL RESISTANCE PER SECTION	2500.0 OHMS ALL SECTIONS
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.100 INCHES NOMINAL
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 HEAT SINK ALL SECTIONS
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0/+10.0 ALL SECTIONS
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN