When you are in search of top-quality Resistor Variable Nonwire Wound items that are listed with the NSN 5905013686768, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number 72M1N048S504U, a Clarostat Sensors And Controls item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5905-01-368-6768 item from Clarostat Sensors And Controls was specifically produced under the CAGE Code 12697. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5905 Resistors. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-368-6768 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 013686768 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 72M1N048S504U | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 260.0 NOMINAL |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.219 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 MINIMUM AND 305.0 MAXIMUM |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 100.0 SINGLE SECTION |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| AAPN | SECTION QUANTITY | 1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.587 INCHES MINIMUM AND 0.649 INCHES MAXIMUM |
| AEFM | MAXIMUM STOP TORQUE | 64.00 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.289 INCHES MINIMUM AND 0.321 INCHES MAXIMUM |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 400.0 KILOHMS SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote