Request a Prompt Quote on Clarostat Sensors And Controls Part Number CM45446-1 with the NSN 5905012956892

Part Number: CM45446-1

Alternate P/N: CM454461

Manufacturer: Clarostat Sensors And Controls

NSN: 5905-01-295-6892

NIIN: 012956892

Item Name : Resistor Variable Nonwire Wound

CAGE Code: 12697

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

When you are in search of top-quality Resistor Variable Nonwire Wound items that are listed with the NSN 5905012956892, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number CM45446-1, a Clarostat Sensors And Controls item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5905-01-295-6892 item from Clarostat Sensors And Controls was specifically produced under the CAGE Code 12697. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5905 Resistors. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!

NSN Information for Part Number CM45446-1 with NSN 5905-01-295-6892, 5905012956892

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-295-6892 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND	5905	012956892	0	N	B
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		B	A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
B75A0025-1	5	2	5

Characteristics Data of NSN 5905-01-295-6892, 5905012956892

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	RECTANGULAR BUSHING MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABJT	TERMINAL LENGTH	0.250 INCHES NOMINAL
ABNB	FIRST FLAT LENGTH	0.031 INCHES MINIMUM AND 0.047 INCHES MAXIMUM
ABNC	FLAT HEIGHT	0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.122 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.500 INCHES NOMINAL
ADAP	MOUNTING BUSHING LENGTH	0.250 INCHES NOMINAL
ADAQ	BODY LENGTH	0.469 INCHES MINIMUM AND 0.499 INCHES MAXIMUM
ADAT	BODY WIDTH	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
ADAU	BODY HEIGHT	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
AEDX	SHAFT STYLE	ROUND,FLATTED
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	290.0 MINIMUM AND 300.0 MAXIMUM
AEFK	MAXIMUM STARTING TORQUE	6.00 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	6.00 INCH-OUNCES
AEFM	MAXIMUM STOP TORQUE	48.00 INCH-OUNCES
AEFP	NONTURN DEVICE RADIUS	0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.200 INCHES NOMINAL
AJYN	SCREW THREAD DIAMETER	0.250 INCHES NOMINAL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0
AXGY	MOUNTING METHOD	STANDARD BUSHING
CBBL	FEATURES PROVIDED	HUMIDITY PROOF
CBME	CUBIC MEASURE	0.125 CUBIC INCHES
CQCC	ELECTRICAL RESISTANCE PER SECTION	50.0 KILOHMS SINGLE SECTION
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	290.0 MINIMUM AND 300.0 MAXIMUM
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.100 INCHES NOMINAL
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
CQPH	DEVICE DESIGN TYPE	NONTURN AT 9 OCLOCK
CQTM	TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-150.0 TO 150.0 SINGLE SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
CXHN	SHAFT BEARING TYPE	SLEEVE
TEST	TEST DATA DOCUMENT	12464-B75A0025 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN