Request a Prompt Quote on Clarostat Sensors And Controls Part Number CM28599-2 with the NSN 5905011112757

Part Number: CM28599-2

Alternate P/N: CM285992

Manufacturer: Clarostat Sensors And Controls

NSN: 5905-01-111-2757

NIIN: 011112757

Item Name : Resistor Variable Wire Wound Pre

CAGE Code: 12697

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

When you are in search of top-quality Resistor Variable Wire Wound Pre items that are listed with the NSN 5905011112757, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number CM28599-2, a Clarostat Sensors And Controls item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5905-01-111-2757 item from Clarostat Sensors And Controls was specifically produced under the CAGE Code 12697. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5905 Resistors. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!

NSN Information for Part Number CM28599-2 with NSN 5905-01-111-2757, 5905011112757

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-111-2757 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE	5905	011112757		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
140-0-2-501	5	2	3

Characteristics Data of NSN 5905-01-111-2757, 5905011112757

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABPM	BODY DIAMETER	0.495 NOMINAL MILS AND 0.505 NOMINAL CENTIMETERS
ABWV	SHAFT DIAMETER	0.1248 INCHES MINIMUM AND 0.1251 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
ADAP	MOUNTING BUSHING LENGTH	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
ADAQ	BODY LENGTH	0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
AEDX	SHAFT STYLE	ROUND,SLOTTED
AEDZ	SHAFT BEARING TYPE	BEARING
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	320.0 NOMINAL
AEFK	MAXIMUM STARTING TORQUE	12.00 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	12.00 INCH-OUNCES
AEFM	MAXIMUM STOP TORQUE	80.00 INCH-OUNCES
AEFN	NONTURN DEVICE LOCATION	AT 6 OCLOCK
AEFP	NONTURN DEVICE RADIUS	0.133 INCHES MINIMUM AND 0.136 INCHES MAXIMUM
AEFY	SHAFT END PLAY	0.006 INCHES
AEFZ	SHAFT RUNOUT	0.002 INCHES
AEGA	LATERAL RUNOUT	0.003 INCHES
AEGB	PILOT DIAMETER RUNOUT	0.002 INCHES
AEGC	SHAFT RADIAL PLAY	0.003 INCHES
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AJYN	SCREW THREAD DIAMETER	0.250 INCHES NOMINAL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0
APXH	TERMINAL LOCATION	REAR END
AXGY	MOUNTING METHOD	STANDARD BUSHING
CBBL	FEATURES PROVIDED	HUMIDITY PROOF
CBME	CUBIC MEASURE	0.060 CUBIC INCHES
CQCC	ELECTRICAL RESISTANCE PER SECTION	500.0 OHMS C AND BETTER FLOORING
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	330.0 NOMINAL
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-1.00/1.00 SINGLE SECTION
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-20.0/20.0 SINGLE SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 7TH SECONDARY QUALITY
CRGM	FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0/5.0 SINGLE SECTION
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS
CSBX	FUNCTION CHARACTERISTIC PER SECTION	7 OCLOCK ALL PRIMARIES
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
TTQY	TERMINAL TYPE AND QUANTITY	3 TURRET