Request a Prompt Quote on Clarostat Sensors And Controls Part Number M42M CM28066 with the NSN 5905009729851

Part Number: M42M CM28066

Alternate P/N: M42MCM28066

Manufacturer: Clarostat Sensors And Controls

NSN: 5905-00-972-9851

NIIN: 009729851

Item Name : Resistor Variable Wire Wound Pre

CAGE Code: 12697

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

When you are in search of top-quality Resistor Variable Wire Wound Pre items that are listed with the NSN 5905009729851, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number M42M CM28066, a Clarostat Sensors And Controls item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5905-00-972-9851 item from Clarostat Sensors And Controls was specifically produced under the CAGE Code 12697. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5905 Resistors. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!

NSN Information for Part Number M42M CM28066 with NSN 5905-00-972-9851, 5905009729851

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-972-9851 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE	5905	009729851	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
M42M CM28066	6	9	5

Characteristics Data of NSN 5905-00-972-9851, 5905009729851

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	11
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABPM	BODY DIAMETER	1.000 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.2485 INCHES MINIMUM AND 0.2490 INCHES MAXIMUM
ABXF	SHAFT LENGTH	1.875 INCHES NOMINAL
ADAP	MOUNTING BUSHING LENGTH	0.375 INCHES NOMINAL
ADAQ	BODY LENGTH	0.375 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND
AEDZ	SHAFT BEARING TYPE	SLEEVE
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	278.0 MINIMUM AND 282.0 MAXIMUM
AEFK	MAXIMUM STARTING TORQUE	1.50 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	1.50 INCH-OUNCES
AEFM	MAXIMUM STOP TORQUE	128.00 INCH-OUNCES
AEFY	SHAFT END PLAY	0.015 INCHES
AJYN	SCREW THREAD DIAMETER	0.375 INCHES NOMINAL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0
APXH	TERMINAL LOCATION	LOWER ADJACENT SIDE TWO ROWS
AXGY	MOUNTING METHOD	STANDARD BUSHING
CQCC	ELECTRICAL RESISTANCE PER SECTION	2.0 KILOHMS ALL SECTIONS
CQCH	TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION	140.0 ALL SECTIONS
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	288.0 MINIMUM AND 294.0 MAXIMUM
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-1.00 TO 1.00 ALL SECTIONS
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	105.0 ALL SECTIONS
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	3.0 FREE AIR ALL SECTIONS
CRGM	FUNCTION CONFORMITY PER SECTION	ALL SECTIONS ABSOLUTE LINEARITY
CRJS	FIXED TAP QUANTITY PER SECTION	1 ALL SECTIONS
CRKS	TAP LOCATION TOLERANCE PER SECTION	-3.0/3.0 DEG ANGULAR ROTATION ALL SECTIONS
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 ALL SECTIONS
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS
CSBW	TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS	1000.0 ALL SECTIONS
CSBX	FUNCTION CHARACTERISTIC PER SECTION	ALL SECTIONS LINEAR
CSCY	TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS	-20.0/20.0 ALL SECTIONS
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	40.0 ALL SECTIONS
TTQY	TERMINAL TYPE AND QUANTITY	33 TAB,SOLDER LUG