Request a Prompt Quote on Andrews Laser Works Corp Part Number 332C446P143 with the NSN 5340011527693

Part Number: 332C446P143

Manufacturer: Andrews Laser Works Corp

NSN: 5340-01-152-7693

NIIN: 011527693

Item Name : Bracket Angle

CAGE Code: 10229

FSC: 5340 Hardware Commercial

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 01

When you are in search of top-quality Bracket Angle items that are listed with the NSN 5340011527693, we have you covered here on National Stock Number Supply. On this page, you can request a quote on part number 332C446P143, a Andrews Laser Works Corp item that is readily available for purchase from our website today! If you would like to procure this particular part or simply wish to receive information for your comparisons, be sure to submit a request with as much information as you can regarding your needs and restrictions. Within 15 minutes of receiving and reviewing a completed form, a member of our staff will reach out to you in order to continue the purchasing process.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that you only procure the exact items that you require for your operations, we always list everything we offer with as much relevant information as possible. For example, the NSN 5340-01-152-7693 item from Andrews Laser Works Corp was specifically produced under the CAGE Code 10229. Additionally, with the first digits of its NSN, this item also belongs to the FSC 5340 Hardware Commercial. With such details, narrowing down your search is made easy. If you have any questions regarding our offerings and services or simply wish to speak with a representative regarding our stock, be sure to give us a call or email at your convenience so that we may assist you however we can!

NSN Information for Part Number 332C446P143 with NSN 5340-01-152-7693, 5340011527693

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-152-7693 Item PartTypeName: BRACKET,ANGLE	5340	011527693	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
332C446P143	5	9	5

Characteristics Data of NSN 5340-01-152-7693, 5340011527693

MRC	Criteria	Characteristic
ACHY	MOUNTING HOLE TYPE	PLAIN
ADLK	FIRST LEG LENGTH	0.697 INCHES MINIMUM AND 0.709 INCHES MAXIMUM
ADLL	SECOND LEG LENGTH	1.357 INCHES MINIMUM AND 1.369 INCHES MAXIMUM
AHLF	SECOND LEG WIDTH	0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
AHLK	FIRST LEG HOLE DIAMETER	0.219 INCHES NOMINAL
AHLN	SECOND LEG HOLE DIAMETER	0.406 INCHES NOMINAL
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.290 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.314 INCHES MINIMUM AND 0.316 INCHES MAXIMUM
AHPW	FIRST LEG THICKNESS	0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
AHPX	SECOND LEG THICKNESS	0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
AHQN	FIRST LEG WIDTH	0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.290 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.280 INCHES NOMINAL
AJFP	FIRST LEG END RADIUS	0.420 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
AJFQ	SECOND LEG END RADIUS	0.420 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
AJZU	FIRST LEG STYLE	END RADIUS
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
MATT	MATERIAL	STEEL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS5510 ASSN STD SINGLE MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	ANGLE